coupling agentsA300 (countertype of EvonikAMMO/ShinEtsu KBM-903/Dow CorningZ-6610/Momentive A-1110)

• CAS No.: 13822-56-5
• Formula: C6H17NO3Si
• Appearance: Liquid
• Usage: Coating Auxiliary Agents
• Color: colorless
• Transport Package: 25kg/drum
• Model NO.: coupling agents
• Specification: 98% Min
• Trademark: LEPUZ
• Origin: CHINA
• Production Capacity: 5000 MT/YEAR

Product Description

Product Description

 

SECTION 1 - Identification of substance
Product Name:      (3-Aminopropyl)trimethoxysilane
Manufacturer/Supplier: NANJING LEPUZ CHEMICAL CO., LTD.
Address:      RM1119 Transocean Tower, No.7 Qingjiang South Road, Nanjing, China.
City: Nanjing
Post Code 210000
Information Telephone Number: 86-25-85356257
Fax:   [phone]

SECTION 2- Composition/data on components
Synonyms : 3-(Trimethoxysilyl)propylamine
Formula : C6H17NO3Si 
Molecular weight : 179.29 g/mol
CAS-No. : 13822-56-5
EC-No. : 237-511-5

SECTION 3 - Hazards identification
3.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin sensitization (Category 1), H317
For the full text of the H-Statements mentioned in this Section, see Section 16.

3.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word  
Signal word   Warning
Hazard statement(s)
H317 May cause an allergic skin reaction.
Precautionary statement(s)
P280 Wear protective gloves.
Supplemental Hazard
Statements  none

3.3 Other hazards - none


SECTION 4: First aid measures
4.1 Description of first-aid measures
General advice
Consult a physician. Show this material safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11

4.3 Indication of any immediate medical attention and special treatment needed
No data available

SECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing media
Carbon dioxide (CO2) Foam Dry powder

5.2 Special hazards arising from the substance or mixture
Carbon oxides
Nitrogen oxides (NOx)
silicon oxides Combustible.
Vapors are heavier than air and may spread along floors.
Forms explosive mixtures with air on intense heating.
Development of hazardous combustion gases or vapours possible in the event of fire.

5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.

5.4 Further information
No data available


SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or
gas. Ensure adequate ventilation. Avoid breathing dust.
For personal protection see section 8.

6.2 Environmental precautions
Do not let product enter drains.

6.3 Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.

6.4 Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
7.1 Precautions for safe handling
Advice on safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Advice on protection against fire and explosion
Provide appropriate exhaust ventilation at places where dust is formed.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and at the end of workday.
For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Ingredients with workplace control parameters

8.2 Exposure controls
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and
approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact
with this product. Dispose of contaminated gloves after use in accordance with
applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU)
2016/425 and the standard EN 374 derived from it.

Body Protection
Complete suit protecting against chemicals, The type of protective equipment must
be selected according to the concentration and amount of the dangerous substance
at the specific workplace.

Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle
respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU
EN 143) respirator cartridges. Use respirators and components tested and approved
under appropriate government standards such as NIOSH (US) or CEN (EU).

Control of environmental exposure
Do not let product enter drains.

SECTION 9 - Physical and chemical properties
a) Physical state           liquid
b) Color                 colorless
c) Odor                  No data available
d) Melting
point/freezing point      Melting point/freezing point: < -80 °C at 1,013 hPa - OECD Test Guideline 102
e) Initial boiling point
and boiling range        91 - 92 °C at 20 hPa - lit.
f) Flammability (solid,
gas)                   No data available
g) Upper/lower
flammability or
explosive limits          No data available
h) Flash point              87°C - closed cup - Regulation (EC) No. 440/2008, Annex, A.9
i) Autoignition 
Temperature             No data available
j) Decomposition
Temperature           No data available
k) pH                  No data available
l) Viscosity              Viscosity, kinematic: 1.77 mm2/s at 20 °C 
Viscosity, dynamic: No data available
m) Water solubility        soluble
n) Partition coefficient:
n-octanol/water         No data available
o) Vapor pressure          No data available
p) Density               1.027 g/cm3 at 25 °C - lit.
Relative density         1.014 at 20 °C - OECD Test Guideline 109
q) Relative vapor
density
r) Particle
Characteristics          No data available
s) Explosive properties      No data available
t) Oxidizing properties      none

SECTION 10: Stability and reactivity
10.1 Reactivity
No data available

10.2 Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
May decompose on exposure to moist air or water.

10.3 Possibility of hazardous reactions
No data available

10.4 Conditions to avoid
Strong heating.

10.5 Incompatible materials
No data available

10.6 Hazardous decomposition products
In the event of fire: see section 5


SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - male - 2,970 mg/kg
 (OECD Test Guideline 401)
Inhalation: No data available
LD50 Dermal - Rat - male - 11,300 mg/kg
(OECD Test Guideline 402)

Skin corrosion/irritation
Skin - Rabbit
Result: No skin irritation - 4 h
(OECD Test Guideline 404)

Serious eye damage/eye irritation
Eyes - Rabbit
Result: No eye irritation
(OECD Test Guideline 405)

Respiratory or skin sensitization
Maximization Test - Guinea pig
Result: May cause sensitization by skin contact.
(OECD Test Guideline 406)

Germ cell mutagenicity
Ames test
S. typhimurium
Result: negative

Carcinogenicity
IARC: No ingredient of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.

Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available

SECTION 12: Ecological information
12.1 Toxicity
Toxicity to fish static test LC50 - Danio rerio (zebra fish) - > 934 mg/l - 96 h (OECD Test Guideline 203)

Toxicity to daphnia and other aquatic invertebrates
semi-static test EC50 - Daphnia magna (Water flea) - > 331 mg/l - 48 h (OECD Test Guideline 202)

Toxicity to algae s
static test EC50 - Desmodesmus subspicatus (green algae) - > 100 mg/l - 72 h (OECD Test Guideline 201)

Toxicity to bacteria
static test EC50 - Sludge Treatment - > 43 mg/l - 5.75 h (OECD Test Guideline 209)

Toxicity to daphnia and other aquatic invertebrates(Chronic toxicity)
semi-static test NOEC - Daphnia magna (Water flea) - >= 0.0074mg/l - 21 d
Remarks: (ECHA)

12.2 Persistence and degradability
Biodegradability
aerobic - Exposure time 28 d
Result: 76 % - Readily biodegradable.
(OECD Test Guideline 306)

SECTION 13: Disposal considerations
13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or
mix the material with a combustible solvent and burn in a chemical incinerator equipped
with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.


SECTION 14: Transport information
14.1 UN number
ADR/RID: -    IMDG: -    IATA: -

14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods

14.3 Transport hazard class(es)
ADR/RID: -    IMDG: -    IATA: -

14.4 Packaging group
ADR/RID: -    IMDG: -    IATA: -

14.5 Environmental hazards
ADR/RID: no    IMDG Marine pollutant: no    IATA: no

14.6 Special precautions for user
Based on chemical properties, choose appropriate tools and conditions of transport. Transporting tools shall be equipped with appropriate and sufficient firefighting equipment and emergency leaking installations. If transporting by road, please go along the specified route.

SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.

SECTION 16 - Other information
This product should be stored, handle and used in accordance with good industrial hygiene practices and in conformity with any legal regulation. The information contained herein is based on the present state of our knowledge and is intended to describe our products from the point of view of safety requirements. It should not therefore be construed as guaranteeing specific properties.

 

Packaging & Shipping

 

Packing
25kg/carton or fiber drum

 

Application

 

Main products
 

Optical brighteners: OB    OB-1   OB-3   KCB    FP-127    KSN    MDAC(SWN)    CBS-X

UV absorbers: UV-531    UV-9(BP-3)    UV-P    UV-326    UV-327    UV-328    UV-329   
                         UV-1130   UV-284(BP-4) 

Light stabilizers: 622    770    944    292    783    695

 

After Sales Service

 

Our Services

We have exact inventory plans to guarantee stable supply.

We have many years' experience of chemical logistics and dangerous chemical managers with specially trained, which ensure the safety and right of chemicals, timely logistics.

Our laboratory takes strictly testing on every lot of goods according to customers' requirement. Meanwhile we has good relationship with the third party company SGS.

After-sales service is the important part in our service. If there are quality problems, we will actively cooperate with the customers and solve the problems early.

We expect to become good partners with our customers for long.





Company Information 

NANJING LEPUZ CHEMICAL CO., LTD. is an ISO-certified modernized chemical enterprise concentrating on the production, sales and service for pesticide, plastic and coating additives, fine chemicals and intermediates.  
Our products are widely used in agriculture, plastic and rubber industry, medical industry, paints, printing inks and etc.  
 
Our company's headquarters is based in Nanjing city, Jiangsu Province, China.  
Our factory is located in Touqiao Town, Hanjiang District, Yangzhou City, where is adjacent to Guangling Hi-tech Development Zone, mainly producing high quality plastic additives and intermediates such as optical brighteners and etc.

We have established long years' technical cooperation with Nanjing University, Nanjing Tech University, and make continuous innovation to fulfill the changing market's demand and trends.  

Besides the professional R&D team, our factory has advanced production and testing equipments, which can be used for testing and reprocessing to ensure the high quality and meet customers' different requirement. 

With profound chemistry knowledge and rich experience, our business team can offer professional customized technical supports and solution for customer's demand.

Till now our products have occupied a good market in China, and also exported to Europe, the United States, Japan and South Korea, Southeast Asia, the Middle East, Central and South America, Africa and etc.  

Welcome to contact us. Hope we can have a good cooperation and bright future.


 

 

           

FAQ

 

Q: Do you have any certificate for quality?

 A: Yes, we have ISO9001:2008 quality system certificate and REACH.

 

Q: Can you customize products?

A: Yes, we can.

 

Q: Can you provide samples for quality checking before placing an order?

A: Samples are avaliable upon request, but the shipping cost should be paid by customer.

 

Q: How to get the price list?

A: Please inqire us by alibaba/email.

 

Q: What's your payment term?

A: TT/LC/DA/DP/Paypal